| |
| Wiring
for Meter with Two Wires 4-20mA Output Signal |
| |
This meter uses two wires to transmit
4-20mA output signal to other equipments, with power supply
24V DC ＼10%, the maximum load resistance for output circuit
600Ω(including resistance of cable).
Normally, 600V PVC insulated wire or cable should be used
as connecting wire. The two cores shielded wire (RVVP2〜0.5mm)
should be used where electrical noise occurs likely. The outer
shielded layer should be connected to the grounding screw
in amplifier box reliably.
Appropriate shielded wire should be used to meet field temperature
when meter used in high or low temperature ambient.
|
Wiring for 4-20mA and Frequency Signal
Output at the Same Time
|
|
