| |
| Technical Specifications of KVCF V-cone Flow Transducer |
| |
1. Accuracy: ＼ 0.5 %(
Accuracy of differential pressure transmitter is no less than
0.2%)
( β: 0.45 - 0.85, When β< 0.55, turndown ratio 4:1, accuracy
＋0.30)
2. Repeatability: ＼0.1%
3. Pressure: ＋ 16MPa, Max＋ 42MPa
4. Operating Temperature: -40 - 700≧
5. Ambient temperature: - 40 - 65≧
6. Installation straight pipe requirement: 0-3D for upperstream,
0-1D for downstream
7. Wide turndown ratio: 10:1
8. Low pressure loss: For same β, pressure loss is just 1/3
- 1/5 of that of orifice plate.
Medium: V-cone flowmeter can be widely applied to kinds of
flow for municipal, electrical power, chemical, petrochemical,
metallurgy, and food industry etc., including almost all gas
and fluid.
|
| |
| Medium in Detail |
| |
1. Gas
Coal gas: Coke-oven gas, BFG, city gas
Natural gas: Includes natural gas with humidity more than 5%
Kinds of hydrocarbon gas: Hydrocarbon of methane series, Olefinic hydrocarbon series etc.
Kinds of gas: H2, He, Ar, O2, N2 etc.
Corrosive gas: Wet chloride gas etc.
Air: Air with water, dust, compressed air etc.
Stack gas
2. Steam
Saturated steam
Overheated steam
3. Liquid
Oil: Crude oil, fuel oil, emulsible oil with water, diesel oil etc.
Water: Well water, fresh water, industry water, sewage etc.
Kinds of solution of acid, alkali, salt etc.
Organic matter chemicals: Methanol, glycol, xylene etc.
.
4. Special Fluid
Oil + HC gas+ sand
Water with gas: H2O + N2 + Air; H2O + CO2 etc.
. |
|
