| |
| Structure of Adjustable Inserted Electromagnetic Flowmeter & Dimensions |
| |
|
Parts:
| 1. Hand handle |
2. Converter |
3. Guide rod |
| 4. Scale |
5. Screw rod |
6. Enclosure |
| 7. Seat for inserted rod |
8. Ball valve |
9. Inserted rod |
| 10. Transducer |
|
|
|
| Installation Procedure for Adjustable Type |
a) Drill hole in the pipe to weld duct, mount and meter as above;
b) Calculate and insert meter into pipe for depth
of 0.5D, and rotate hand handle to the depth of arrow
indication, then tighten the companion bolts;
c) If clean pipe without fluid stop, loosen companion
bolts to make screw rod run rotatable, rotate hand handle
to arrow indication of red reading 360 on the scale
where measuring probe is over the ball valve, close
the valve and clean. |
Caution:
1. Flow direction must be conformed to the flow arrow on the meter body;
2. To avoid damaging meter when you weld the flange and pipe, the flowmeter must be not installed on the pipe. |
|
|
